Camsat’s wireless multi-receiver reduces number of receivers in one monitoring system

CAMSAT's CAM5816h Multi-Rx receiver
CAMSAT's CAM5816h Multi-Rx receiver

CAMSAT's CAM5816h Multi-Rx receiver

CAMSAT`s  CAM5816h Multi-Rx receiver is  the latest solution which reduces the number of receivers in one monitoring system by four times. It is very important if costs of a monitoring system could be lowered and also while installing such systems. Up till now, monitoring systems with eight CCTV cameras required eight receivers in receiving points. Now, thanks to CAM5816h Multi – Rx the number of receivers is reduced to just two. This receiver is a very innovative solution, it is a response to our customer`s questions and needs. CAM5816h Multi-Rx provides 16-channel analogue real time wireless transmission.

There are avaliable two versions of multi-receiver:

  • external – CAM5816h Multi-Rx – in outdoor IP65 housing with integral directional
  • antenna AK19 -19dbi
  • internal – CAM5816 Multi -Rx – with mini omnidirectional antenna

This device has one antenna input which allowes receiving four video PAL signals simultaneously and eight audio signals. Usage of omnidirectional antenna enables signal receiving from all directions (360º). If signal is being transmitted from just one direction there is a possibility of using directional antenna AK19, what extends range of work as well. Another advantage of multi-receiver is fact that for each video output any channel of work can be assigned.

Usage:

  • as a multi-receiver – receives four independent video signals (PAL)
  • as a signal repeater

Specification:

  • 4 video outputs and 8 audio outputs
  • 16 channels of work
  • for each video output any channel of work can be assigned
  • supertension safety device on power input
  • outdoor and indoor housing available
  • operates with all CAM series devices
  • omnidirectional antenna AP05 – 5dbi, angle of work 360/18 (horizontal angle/vertical angle) – range of work with CAM5816h-Tx up to 200 m
  • omnidirectional antenna ProEter – 12dbi, angle of work 360/60 – range of work  with CAM5816h-Tx up to 1 km
  • directional antenna AK19 – 19dbi, angle of work 18/18 – range of work with CAM5816h-Tx up to 1,5 km
  • directional parabolic antenna GD-27dbi, angle of work 4/4 – range of work with CAM5816h-Tx up to 4 km

Examples of set selection:

  • For 3 CCTV cameras: CAM5816h Multi-Rx × 1 + CAM5816hTx × 3
  • For 4 CCTV cameras: CAM5816h Multi-Rx × 1 + CAM5816hTx × 4
  • For 8 CCTV cameras: CAM5816h Multi-Rx × 2 + CAM5816hTx × 8

Leave a Comment

You must be logged in to post a comment.